Consulting / Training Services (North America)
Companies are grouped under North America or Europe for convenience in locating a local resource only. Most companies will travel to meet consulting and training needs worldwide.
| Advanced Quality Services, Inc. Granada Hills, CA Tel: 818-367-2990 Fax: 818-366-0370 |
Consulting & training for medical, pharmaceutical and biotechnology, quality, validation and regulatory. Services offered include: onsite instrument and system calibration, metrology engineering, CFR-21 compliance calibration program audit & start up, ESD control consulting, equipment manual & SOP writing, room & environment temperature/humidity mapping, control system, building management and computerized instrumentation consulting, metrology and calibration training, manufacturers & third party calibration support, metrology program management, metrology vendor auditing, 483 response assistance & support. |
| A-Metrology-Z Indianapolis, IN Tel/Fax: 317-862-0068 dduff@aol.com |
Consulting and training, auditing. |
| 2-B Quality Training Services Kitchener, ON, Canada Tel: 519-893-6303 Fax: 519-893-7266 gdt.n2v.net |
Training courses in geometric dimensioning and tolerancing in accordance with ASME Y14.5M-1994 standard. |
| Beamex, Inc Marietta, GA Tel: 770-951-1927 Fax: 770-951-1928 info@beamex.com www.beamex.com |
Beamex is a technology and service company that develops, manufactures and markets high-quality calibration equipment, software, systems and services for the calibration and maintenance of process instruments. The company is a leading worldwide provider of calibration solutions that meet even the most demanding requirements. |
| C.A. Motzko Redwood City, CA Tel: 650-595-8878 Fax: 650-595-1285 www.motzko.com solutions@motzko.com |
Consulting on enterprise-wide equipment management and metrology. Manufactures equipment management software with electronic T&M equipment catalog, barcode features. |
| DH Instruments Phoenix, AZ Tel: 602-431-9100 Fax: 602-431-9559 www.dhinstruments.com |
Pressure and flow training seminars. Also manufactures instruments for pressure and flow and provides calibration services. |
| Digital Metrology Solutions, Inc. Tel: 812-314-0043 Fax: 561-673-0586 mcmalburg@digitalmetrology.com. www.digitalmetrology.com |
Custom dimensional and surface metrology software, training and consulting. Offers downloadable freeware on website. |
| Elecronic Development Labs, Inc. Tel: 434-799-0807 Tel: toll free: 800-DIAL-EDL Fax: 434-799-0847 technicalsales@edl-inc.com www.edl-incl.com |
Manufactures a wide variety of temperature measurement products, including thermocouple and RTD sensors, as well as digital and analog instrumentation. Manufactures products for the calibration surface, immersion and IR sensors. Provides calibration services for temperature sensors and instrumentation, consulting and training courses. |
| Equipment Reliability Institute Santa Barbara, CA Tel: 805-564-1260 Fax: 805-564-1260 www.equipment-reliability.com |
Seminars, onsite training, distance education (web based), and consultancy in vibration and shock for mechanical, electronic, aerospace, military and automotive industries. |
| Excel Partnership, Inc. Sandy Hook, CT Tel: 203-426-3281 Fax: 203-426-7811 www.excelpartnership.com |
Consulting and training in quality, environmental and regulatory management, calibration and control of measuring systems, understanding and implementing ISO Guide 25, MSA, QS-9000, GD&T, etc. |
| Fluke Corporation Everett, WA Tel: 800-44-FLUKE Tel: 425-347-6100 Fax: 800-FLUKE-Fax: Fax: 425-356-5116 www.fluke.com info@tc.fluke.com In Europe: Fluke Europe B.V. Eindhoven, The Netherlands. Tel +31-40-2675-200 Fax +31-4-2675-222 calibration_info@fluke.nl |
Training seminars throughout year on lab management, calibration software, fundamentals of metrology. Also manufactures reference standards, calibrators and test tools. Provides calibration service. |
| Hart Scientific American Fork, UT Tel: 800-438-4278 Fax: 801-763-1010 Tel: 801-763-1600 www.hartscientific.com |
Temperature training courses. Also manufactures temperature instrumentation and provides calibration service. |
| Integrated Sciences Group Tel: 661-872-1683 Fax: 661-872-3669 isg@isgmax.com www.isgmax.com |
Provides interval analysis services (ISG Interval Service); measurement technology R&D; analytical metrology consulting; metrology software system design. Also manufactures uncertainty analysis software (UncertaintyAnalyzer™); measurement decision risk analysis software (AccuracyRatio™); SPC software (SPCView)™; calibration interval analysis software (IntervalMAX™); petroleum technology management software (SteamTools™, ResHeat™). Integrated Sciences Group has developed free metrology software tools for controlling uncertainties and risks. These metrology freeware tools can be downloaded by visiting www.isgmax.com/freeware.htm. |
| International Institute of Consulting & Training (IICT) Bloomington, MH Tel: 952-881-1637 Fax: 952-881-4419 www.consultinginstitute.net |
Calibration/metrology training. |
| Jaeger Enterprises Tel: 408-867-1743 Fax: 408-867-3705 jaegerenterprises@attbi.com www.jaegerenterprises.com |
Consulting in laboratory management, proposal writing, accreditation, documentary and hardward standards, technical issues, traceability. Training in ISO standards, uncertainties, accreditation, traceability. |
| J&G Technology Minnetonka, MN Tel: 952-935-1108 Fax: 952-935-1108 gmeyer@jg-technology.com http://www.jg-technology.com |
Consulting and training services in metrology. Customized courses in general metrology; electrical, physical, and dimensional seminars; ASQ Certified Calibration Technician training; troubleshooting electronic test equipment; and quality practices. |
| J.M. Ingram & Associates Tel: 315-393-0229 jingram@twcny.rr.com |
An association of experts from the metrology industry providing consulting services for companies developing or expanding their metrology function as well as traditional management consulting services. Experience in the biomedical, automotive, aerospace, software, leasing and test equipment manufacturing industries. Proven solutions for performance review systems, customer service solutions and quality assurance. Training courses in basic metrology, measurement techniques and GLP/GMP fundamentals for the biomedical industry and compliance in FDA regulated companies. Customized training is available in calibration laboratory management, calibration procedure development and metrology lab design and layout. Courses in business management covering ethics, strategic planning, leadership and management, time management, workplace diversity and leasing are also available. Assistance in writing or developing calibration or management procedures, quality manuals, employee handbooks, brochures, web-sites, technical notes and papers, proposals and business plans. Experienced laboratory assessors can provide a pre-audit or gap analysis to ANSI/NCSL Z540-1 or ISO 17025. |
| JTI Systems Albuquerque, NM Tel: 505-710-4999 Fax: 505-878-0322 jti@rt66.com www.jtipmap.com |
On site consulting and training in measurement uncertainty determination and control, process measurement assurance program (PMAP), ISO 17025, calibration systems and interval management, metrology engineering (physical, mass, electrical, optical, dimensional), measurement systems analysis, measurement systems gap assessments and laboratory accreditation. Provides training seminars on measurement uncertainty analysis using PMAP, fundamentals of measurement, calibration systems, ISO 17025 and statistical process control. Also offers PMAP software for determining measurement uncertainty, maintaining and determining calibration intervals and real time control charting. |
| LearningMeasure.com Training and Consulting Services Henderson, NV info@learningmeasure.com www.learningmeasure.com |
A place that provides training and consulting services for those in the measurement and metrology fields. The course offerings are designed with the engineer and technician in mind, and to cover a wide range of topics that are relevant to measurement and metrology. |
| NQA Laboratory Services Acton, MA Tel: 800-649-5289 Fax: 978-263-0785 www.nqa-ls.com |
Third party auditors and consultants for ISO/IEC Guide 25 and ISO/IEC 17025. GM & Chrysler approved. |
| Oak Ridge National Lab Metrology Laboratory Oak Ridge, TN Tel: 865-574-7349 Fax: 865-241-4644 ornlmetrology@ornl.gov www.ornl.gov/sci/metrology/index.shtml |
Providing primary calibration services for pressure, temperature, optical pyrometry, electrical/electronic, resistance, capacitance, gas flow, air velocity, vacuum, relative humidity, mass, torque, dimensional measurements, laser frequency, sound, force and frequency. NVLAP accredited in many disciplines to ISO 17025 requirements. Fully NIST-traceable in all disciplines. Metrology consulting, measurement systems development and metrology R&D services are also available. |
| On Time Support Tel: 281-362-0008 Fax: 281-363-0434, ontime@ix.netcom.com www.ontimesupport.com |
Consulting & training on calibration software systems and process calibration software, Met/CAL & Met/TRACK specialists. Also produce Barcode Magician (TM) for use with Met/TRACK. |
| PTI International New York, NY Tel: 212-661-3500 Fax: 941-365-2507 www.pti-international.com |
PTI International delivers performance improvement for professionals in the pharmaceutical, biotech and medical device industries. Our continuing education experience will provide you will the skill base needed to excel in today's workplace! |
| PR Consultants Inc (PRC) New Jersey, Delaware Tel: 631-231-7790 Fax: 973-889-1422 prc-inc@msn.com www.prconsultantsinc.com |
IT consulting with specialization in the area of validation - Process Manufacturing Systems, Lab Instruments, LIMS, Network and SAP. |
| QC Inspection Services, Inc. Burnsville, MN dmedford@qcinspect.com www.qcinspect.com Tel: 800-959-0632 |
We provide QC and manufacturing-related training and consulting on our site or at our customers’ facility. We provide 3rd party inspections and vendor audits/qualifications throughout the nation. We also provide over 55 public courses in 35 cities nationwide. Some of the courses we offer are Geometric Dimensioning and Tolerancing, Gage Calibration Hands-on Workshop, Measurement Uncertainty, Blueprint Reading, CMM Programming, SPC, PPAP, APQP, MSA, Minitab, Design and Process FMEAs, DOE, ASQ’s certification exam reviews, ISO auditor training and many more. Some of the areas of consultation are Medical, ISO, QS, Six Sigma and more. |
| QUAMETEC Tel: 810-225-8588 Fax: 810-225-8589 info@quametec.com www.quametec.com |
Provides complete ISO/IEC17025 accreditation support services including consultancy, training, software and technical assistance to companies involved with ISO/IEC17025 accreditation and/or desiring to improve the quality of their measurement applications. We also provide assistance in establishing calibration activities and specialize in Measurement Uncertainty Training using our "Uncertainty Toolbox for Microsoft Excel". |
| Ruska Instrument Corporation Houston, TX Tel: 713-975-0547 Fax: 713-975-6338 www.ruska.com |
Provides pressure training. Also manufactures deadweight gages, digital pressure gages and controllers, air data test sets and calibration instruments. Also provides calibration services. |
| Science and Engineering Associates Albuquerque, NM Tel: 505-346-9877 Fax: 505-346-0635 csmiroldo@seabase.com www.seabase.com |
ISO 25 quality system consulting and training. We assist labs in developing and implementing ISO 25 programs, as well as performing assessments and providing training. |
| SHOQ Quality Assurance Manuals www.e-shoq.com service@e-shoq.com |
Quality manual templates that comply with ISO 17025. |
| Smith Corporate Metrology Rice Lake, WI Tel: 612-940-1279 Fax: 715-859-6405 |
Metrology training, accreditation consultant, quality system implementation guidance. |
| The Pi Group, Inc. Tel: 301-926-4607 Fax: 301-926-4607 ThePiGroup@earthlink.net |
Consulting and training in Process Improvement and quality systems. Services include gap analysis between existing operations and quality standards such as ISO 17025, coaching and mentoring technical managers, and workshops on traceability and uncertainty. |
| T. Stuart Shannon & Associates Granada Hills CC Tel: 866-799-0186 timothyshannon@shannon-associates.com www.shannon-associates.com |
Instrument calibration services and metrology consulting. Our consultants provide laboratory design to employee training, systems auditing, procedure and method development. Our services group provides calibration on manufacturing / process and test & measurement equipment. |
| Workplace Training Tel: 800-472-2564 Fax: 952-471-8563 www.wptraining.com |
CD training courses on flow, mass, force/torque, electrical, temperature, dimensional, geometric, uncertainty, pressure, SI metric system, shock/vibration, pipette calibration. Developing coursework for CMMs/optic, fiber optics and test instruments. Accepted by ACT for use in community college coursework. |
Consulting / Training Services - Europe
Companies are grouped under North America or Europe for convenience in locating a local resource only. Most companies will travel to meet consulting and training
needs worldwide.
| Apek Quality Services - Wimborne, Dorset, UK Tel +44 (0) 1202 876149 Fax +44 (0) 1202 861210 aqs@apek.co.uk www.apek.co.uk |
Accredited by UKAS to BS EN ISO/IEC 17025:2000 and by BV i to BS EN ISO9002:1994. Commercial service calibration laboratory for dimensional, mechanical, flow. Also Quality training and consultancy. Also manufacturer for electrical, mechanical, electromechanical assembly, precision machining, small and large batch production. "Small enough to care, large enough to cope." |
| Beamex Oy Ab Pietarsaari FINLAND Tel +358 10 550 5000 Fax +358 10 550 5404 info@beamex.com www.beamex.com |
Beamex is a technology and service company that develops, manufactures and markets high-quality calibration equipment, software, systems and services for the calibration and maintenance of process instruments. The company is a leading worldwide provider of calibration solutions that meet even the most demanding requirements. |
| Bert Kotterink Eindhoven, The Netherlands Tel +31 40 2424280 Fax +31 40 2482772 101470.1734@compuserve.com |
Previously conducted training and consulting for Fluke Corporation, Eindhoven. Consultancy and Training. Conducts 5 day course on basics of metrology, traceability, standards, etc. Course can be conducted in English, German, Dutch and French. Course can be conducted onsite throughout Europe. |
| DH Budenberg Aubervilliers, France Tel +33 1 48 39 83 00 Fax +33 1 48 33 65 90 www.dh-budenberg.com |
Training in Pressure metrology. Also a primary standards laboratory for electrical, pressure, temperature. |
| Fluke Corporation Eindhoven, The Netherlands In Europe: Fluke Europe B.V. Eindhoven, The Netherlands. Tel +31-40-2675-200 Fax +31-4-2675-222 calibration_info@fluke.nl www.fluke.com |
Provides training seminars throughout year on lab management, calibration software, fundamentals of metrology. Also manufactures reference standards, calibrators and test tools. Provides calibration service. |
| Hart Scientific Eindhoven, The Netherlands Tel +31-40-2675-401 Fax +31-40-2675-402 harteurope@hartscientific.com |
Temperature training courses. |
| L. B. Cronin Services Ltd Tel +44 (0) 1689 818893 Fax +44 (0) 1689 810542 lbcronin@globalnet.co.uk www.lbcsltd.com |
Consulting and training in measurement accreditation to ISO/IEC 17025, quality assurance, quality auditing, measurement systems, traceability, uncertainties of measurement, proficiency testing and training courses provided. Thirty years experience with MOD, NPL, BCS,NAMAS, UKAS and industry. |
| Martin DeGroot Consultancy Tel +31 (0) 15 2682501 Fax +31 (0) 84 8341760 www.martindegrootconsultancy.nl |
MartinDeGroot consultancy is the company name for the activities of Martin de Groot for RvA, UKAS and Beltest (BKO) as a technical expert in temperature and humidity when evaluating calibration laboratories against ISO 17025. Martin De Groot participates in Kelvin-Lab, a calibration lab for temperature and humidity. Kelvin-Lab participates in development of products for temperature and humidity measurement. Kelvin-Lab does consultancy to assist companies in temperature and humidity related problems, as well as assisting calibration and other laboratories in setting up a calibration system that meets the requirements of ISO17025. Martin de Groot is a teacher for Kelvin-Trainingen providing courses in uncertainty assessment, temperature measurement, humidity measurement and accreditation. |
| Metrology Hellas S.A. Athens, Greece Tel +30-1-6828090 Fax +30-1-6828091 www.metrology.gr |
Consultancy to companies and laboratories acquiring EN 45000 and ISO 9000 standard; consultancy and testing for CE marking; provides metrology training. Also provides calibration and repair service in dimension and pressure. |
| National Engineering Laboratory Glasgow, Scotland Tel +44 (0)1355 220222 Fax +44 (0)1355 272999 www.nel.uk info@nel.uk |
Consultancy in process engineering, structural integrity, instrumentation and control systems, chemical compatibility, flow measurement, seismic and modal analysis, heat transfer, fluid properties, turbines, pumps and valves, computational fluid dynamics, finite element analysis. Training in flow measurement. |
| Workplace Training Tel: 800-472-2564 Fax: 952-471-8563 www.wptraining.com |
CD training courses on flow, mass, force/torque, electrical, temperature, dimensional, geometric, uncertainty, pressure, SI metric system, shock/vibration, pipette calibration. Developing coursework for CMMs/optic, fiber optics and test instruments. Accepted by ACT for use in community college coursework. |
Consulting / Training Services - Middle East
| Newton Metrology Ltd. Jerusalem, Israel www.newtonmetrology.com |
Custom and off-the-shelf software including Evaluator math and uncertainty calculator, Predictor recalibration interval estimator, MetroCom COM DLL, and MetroVal uncertainty softare that combines Evaluator and Predictor. Also provides consulting services on ISO 17025, validation and measurement uncertainty, development of measurement systems, development of time scales, and establishment and maintenance of traceable metrological measurement standards. |
| Metrology Hellas S.A. Tel +30-1-6828090 Fax +30-1-6828091 metrology@metrology.gr www.metrology.gr |
Accredited to EN ISO 9002 by TUV Cert and EN45001 from SIT (No. 129) in dimension and pressure. Provides the following services:
|
Equipment Sales/ Rentals/ Distributors -- USA
| AcuCal, Inc. Manassas, VA Tel: 703-369-3090 Tel: 800-232-0826 Fax: 703-369-3786 acucal@acucal.com www.acucal.com |
Primary standards and calibration service lab for dimensional, electrical, flow, mechanical, microwave, optical, pressure, temperature, time/frequency, vibration/shock. Also authorized distributor of Palmer/Wahl family of products. Also, consulting and refurbished IEQ sales. Accredited. |
| Advanced Test Equipment Corp. San Diego, CA Tel: 1-888-404-ATEC (2832) Fax: 858-558-6570 www.ATECorp.com |
We supply our customers with timely and superior Engineering and Application solutions to their Test, Measurement and Inspection problems, at a fair value, with our core business being the rental, lease and resale of test and measurement equipment. With our massive inventory, we are the one stop solution to your test equipment needs. |
| Calright Instruments San Diego, CA Tel: 866-363-6634 Tel: 619-429-4545 Fax: 619-374-7012 sales@calright.com www.calright.com |
Calright Instruments sells new and pre-owned test and measurement equipment from Agilent/HP, Anritsu, Fluke, Tektronix and more. Purchase new and pre-owned pressure, temperature, electrical, RF/ Microwave calibration equipment here. We repair electronic test equipment from Agilent/HP, Fluke, Tektronix and other leading manufacturers. No evaluation fees. Visit us on-line at www.calright.com. |
| Gauge Repair Service Torrance, CA Tel: 310-212-0912 Fax: 310-320-3032 www.grsusa.com |
Sales/distribution for Ashcroft and Heise pressure instrumentation and Proto, Consolidated Devices and Sturtevant/Richmont torque instrumentation. Also primary standards lab for torque and pressure. A2LA accredited to ISO/IEC 17025-1999, ISO-9001, ISO-9002. Provides repair and calibrations for pressure gauges, dead weight testers, torque wrenches, analyzers & multipliers, temperature, cable tensiometers, transducers, force gauges. Offers on-site calibrations and gauge & dead weight tester rental. |
| Global Test Supply Wilmington, NC Tel: 910-221-9344 Fax: 910-401-1114 www.globaltestsupply.com |
Global Test Supply sells, rents and leases electronic test and measurement equipment including oscilloscopes, spectrum analyzers, power supplies, multimeters, frequency counters, thermometers and megohmeters from leading manufacturers such as Agilent, Tektronixs, Fluke, BK Precision, Instek, Promax, Rohde & Schwartz and Extech. |
| INSCO Metrology and Instrumentation Miami, FL Tel: 305-994-8031 Tel: 787-765-5564 Fax: 305-994-7365 Fax: 787-765-5585 info@inscometrology.com www.inscometrology.com |
Distribute first class weight sets for ASTM 1, 2, 3, 4, 5 and F or OIML E1, E2, F1 and F2. Also Calibration Service Laboratory for mass and temperature. |
| Instrument Rental Labs Broomfield, CO Tel: 888-573-5468 Tel: 303-469-5335 Fax: 303-469-5336 sales@instrumentrentallabs.com www.instrumentrentallabs.com |
Rental and sales of calibration equipment and general purpose test equipment from manufacturers such as Agilent/Hewlett-Packard, Fluke, National Instruments,Tektronix and others: http://testequip.com/sale/used/mfgs/index.html Our web auction page and eBay store includes older and scrapped equipment removed from our rental pool for repair parts: http://testequip.com/sale/used/atauction.html. Certified ISO 9001: 2000. |
| Lehman Scientific, LLC. Toll free: US 800-784-8680 Tel: 717-244-7540 Fax: 717-244-9524 sales@lehmanscientific.com www.lehmanscientific.com |
New, unused surplus and used electronic test and laboratory equipment. Calibration equipment, analytical balances, baths, oscilloscopes, centrifuges, power supplies. Lehman Scientific, 85 Surrey Drive, Wrightsville PA 17368-9081. |
| MetricTest Hayward, CA Tel: 510-264-0887 Tel: 800-432-3424 Fax: 510-264-0886 quotes@metricsales.com www.metrictest.com |
Refurbished test & calibration equipment. |
| Nolatek Houma, LA Tel/toll free: 877-421-5765 Tel: 985-876-5133 Fax: 985-857-9327 info@nolatek.com www.nolatek.com |
Nolatek specializes in test and measurement equipment from the industry's leading manufacturers including HP/Agilent, Tektronix, Anritsu, Rohde & Schwarz, Ando, Keithley, Fluke, and Giga-tronics. Sells and leases. Also buys equipment. |
| Micro Precision Grass Valley, CA Paul Sartori, Division Manager Tel: 530-268-1860 ext: 103 paul@microprecision.com www.microprecision.com |
We provide for all of your test equipment needs. Whether you need to rent a specialized analyzer for a specific task, or wish to purchase fiber optics for your long term needs, we are dedicated to speed, dependability and integrity. As the need for Standards Compliance from our customers became apparent, Micro Precision Calibration achieved an A2LA, ISO 17025-1999 accreditation in a number of scopes. |
| National Test Equipment Oceanside, CA Tel: 760-639-1700 Fax: 760-639-1799 www.ntecusa.com sales@ntecusa.com |
National Test Equipment buys, sells and calibrates a tremendous inventory of electronic test and measurement equipment including Agilent (HP), Tektronix, Fluke, Rohde & Schwarz, microwave, oscilloscopes, spectrum analyzers, power sensors, and much more. Fully automated calibration capabilities for most makes and models. |
| Paul W. Marino Gages, Inc. Warren, MI Tel: 810-759-2400 Fax: 810-759-2423 pmargage@ix.netcom.com www.pmargage.com |
|
| Technical Diagnostic Services, Inc. Arlington, TX Tel: 800-225-7271 Tel: 817-465-9494 Fax: 817-465-9573 www.Test-Equipment-Rental.com |
Buy, sell, rent, lease, calibrate, repair, training, and service electrical test equipment. Technical Diagnostic Services, Inc. is the dominant provider of measurement, test, and diagnostic equipment in the US. We stock equipment from over 250 leading vendors for hundreds of applications. This equipment is available for short or long term rental, lease purchase, and sale. We also provide NIST traceable calibration services with quick turn-arounds, electrical systems training, and services. |
Equipment Sales/Distributors – Asia
| Norbar Torque Tools Pte Ltd 60 Kaki Bukit Place #09-16 Eunos Techpark, Singapore 415979 Contact: Lim Chi Kah Tel +65 68411371 Fax +65 68411372 lim@norbar.com.au www.norbar.com |
SAC-SINGLAS accredited (to ISO/IEC 17025) Torque Calibration Services for:
|
Equipment Sales/ Distributors - Europe
| Crane Scales Ltd. Tel: 0121 556 4062 Fax: 0121 556 8217 neil@cranescales.co.uk www.cranescales.co.uk |
Supply lab scales to weighbridges, with service, repair and hire facilities within the UK. |
| Metrology Hellas S.A. Athens, Greece Tel +30-1-6828090 Fax +30-1-6828091 metrology@metrology.gr www.metrology.gr |
Accredited to EN ISO 9002 by TUV Cert and EN45001 from SIT (No. 129) in dimension and pressure. Provides the following services:
|
| Microlease plc. Harrow, United Kingdom Tel +44 (0) 20 84 200 200 Fax +44 (0) 20 84 200 299 www.microlease.com |
Microlease provide over 3,000 types of test equipment for rent, lease or sale from all major manufacturers, including Acterna, Agilent Technologies, Anritsu, Rohde & Schwarz, Spirent and Tektronix among others. |
| Scandura & Fem S.r.l. Rodano Millepini, Italy Tel +39 02 953200021 Fax +39 02 95328231 www.scandura.it |
Maintenance and calibration laboratory equipment including: single and multifunction calibrators — electronic, pneumatic and electropneumatic, standard version and I.S. version; dry blocks, modular thermostatic baths, vertical and horizontal furnaces. Process instruments, field and workshop measuring instruments and systems, pressure and temperature generators, portable multifunction calibrators, control and safety valve testers, testers and simulators, calibration and maintenance. |
Equipment Sales / Distributors - Middle East
| MYMSA Co. Cairo, Egypt Tel +202 5261888 Tel +202 5261999 Fax +202 5261666 aptos@mymsa.com.eg mymsalab@mymsa.com.eg sales@mymsa.com.eg Website: under construction |
Testing, Measurement and calibration equipments dealer. Testing & calibration Laboratory (service provider). |
| ROHDE & SCHWARZ EMIRATES L.L.C Abu Dhabi, United Arab Emirates Tel: 00971-2-5549411 Fax: 00971-2-5549433 info.rsuae@rohde-schwarz.com www.rohde-schwarz.ae |
Rohde & Schwarz distributors. |
Internet Equipment Sales/Product Info
| eCalibration.com State College, PA Tel: 814-689-1047 Fax: 814-689-1045 editor@ecalibration.com www.ecalibration.com |
Features include current Industry and Product News, Four Comprehensive Vendor Databases, Storefronts, a Career Center, Daily Calibration Tips, upcoming Industry Events, and more. |
| National Test Equipment Oceanside, CA Tel: 760-639-1700 Fax: 760-639-1799 www.ntecusa.com sales@ntecusa.com |
National Test Equipment buys, sells and calibrates a tremendous inventory of electronic test and measurement equipment including Agilent (HP), Tektronix, Fluke, Rohde & Schwarz, microwave, oscilloscopes, spectrum analyzers, power sensors, and much more. Fully automated calibration capabilities for most makes and models. |
| TestMart Tel: 650-624-0525 x3716 Fax: (650) 624-0535 www.testmart.com |
Internet portal for the test and measurement industry. Search and compare on over 7,000 products in 40 product categories. New and refurbished instruments. Information on over 500 manufacturers searchable by product category, manufacturer name and product type. E-Library has up to date information on 15,000 products, calibration intervals, out-of-support dates, Y2K and CE status, product introductions. |
| Industrial Measurement Solutions Rawson, OH Tel: 419-963-3020 Dave@industrialmeasurementsolutions.net www.industrialmeasurementsolutions.net |
Specializing in 3D metrology, Machine Tool calibration services, Machinery Alignment services & Large Part inspections. Utilize equipment such as the HP Laser Interferometer, Federal Electronic Differential Levels & the FARO Laser Tracker X V2 to assess the accuracy or inaccuracy of any large part, machine or machine tool. The FARO Laser Tracker X V2 is a portable contact measurement system that uses laser technology to accurately measure the geometry & level large parts & machinery across a wide range of industrial applications. Services also include: preventative maintenance programs to monitor machine foundations settling, the importance of proper machine alignment in the rubber industry to insure optimum tire uniformity. We also service & calibrate the Portage Inspection Machine & the Portage Lay-out Machine. All equipment is certified & traceable to NIST. |
| QC Inspection Services, Inc. Burnsville, MN dmedford@qcinspect.com www.qcinspect.com Tel: 800-959-0632 |
We provide first article inspection and reverse engineering in our ISO 17025 accredited lab as well as hundreds of quality-related training workshops throughout the nation . We use 15 of the best state-of-the-art CMMs and we employ only CQI certified inspectors and design engineers. We can also provide reverse engineering services on these CMMs as well as on our two laser based scanners and a high-accuracy micro laser scanner. For large parts, we can measure them on our portable CMM at your site or ours. |
| Magna Donnelly Center of Engineering Kentwood, MI Tel: 616-656-8530 Fax: 616-656-8595 sales@centerofengineering.com www.centerofengineering.com |
ISO9001:2000 ceretified, ISO/IEC 17025 A2LA certified. CMM Layout and Inspection, We can test products in various environments,extreme temperatures, high humidity, dust exposure, salt and high pressure water spray, Vibration, many other mechanical, electrical and chemical applications. |
| ADI Limited Sydney, Melbourne, Perth, Darwin, Adelaide, Brisbane Tel: 61-2-9673-8344 Fax: 61-2-9673-8399 testcal@sg.adi-limited.com.au www.adi-limited.com.au |
Accredited to ISO 9002 by NATA. Testing services for vibration/shock and EMI/EMC. Also calibration services for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, frequency, pressure, time. |
| Excel Partnership, Inc. xlp@xlp.com www.excelpartnership.com |
Consulting and training in quality, environmental and regulatory management, calibration and control of measuring systems, understanding and implementing ISO Guide 25, MSA, QS-9000, GD&T, etc. |
| ADI Limited Sydney, Melbourne, Perth, Darwin, Adelaide, Brisbane. Tel: 61-2-9673-8344 Fax: 61-2-9673-8399 testcal@sg.adi-limited.com.au www.adi-limited.com.au |
Accredited to ISO 9002 by NATA. Testing services for vibration/shock and EMI/EMC. Calibration services for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, frequency, pressure, time. |
| Sypris Test & Measurement Billerica, MA Tel: 800-463-8786 Tel: 978-663-2137 Fax: 978-663-6275 www.sypris.com |
Testing services for EMI/EMC. Calibration service lab for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, and pressure. Accredited to ISO Guide 25, ANSI/NCSL Z540. Traceability to NIST. Registered ISO 9002. |
| Sypris Test & Measurement Tel: 800-463-8786 www.sypris.com Billerica, MA Tel: 978-663-2137 Fax: 978-663-6275 Orlando, FL Tel: 407-678-6900 Fax: 407-678-0578 Wayne, NJ Tel: 973-628-1363 Fax: 973-628-7884 |
Calibration service lab for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, and pressure. Accredited to ISO Guide 25, ANSI/NCSL Z540. Traceability to NIST. Registered ISO 9002. |
| ADI Limited Tel: 61-2-9673-8344 Fax: 61-2-9673-8399 testcal@sg.adi-limited.com.au www.adi-limited.com.au |
Accredited to ISO 9002 by NATA. Testing services for vibration/shock and EMI/EMC. Calibration services for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, frequency, pressure, time. National network of laboratories located in Sydney, Melbourne, Perth, Darwin, Adelaide, Brisbane. |
| Magna Donnelly Center of Engineering Kentwood, MI Tel: 616-656-8530 Fax: 616-656-8595 sales@centerofengineering.com www.centerofengineering.com |
ISO9001:2000 ceretified, ISO/IEC 17025 A2LA certified. CMM Layout and Inspection, We can test products in various environments,extreme temperatures, high humidity, dust exposure, salt and high pressure water spray, Vibration, many other mechanical, electrical and chemical applications. |
| Sypris Test & Measurement Tel: 800-463-8786 Orlando, FL Tel: 407-678-6900 Fax: 407-678-0578 www. sypris.com Billerica, MA Tel: 978-663-2137 Fax: 978-663-6275 Wayne, NJ Tel: 973-628-1363 Fax: 973-628-7884 |
Testing services for EMI/EMC. Calibration service lab for dimensional, mechanical, temperature, vibration/shock, electrical, optical, flow, microwave, time/frequency, and pressure. Accredited to ISO Guide 25, ANSI/NCSL Z540. Traceability to NIST. Registered ISO 9002. |